Aktuelle Zeit: Mo 21. Aug 2017, 23:34



Ein neues Thema erstellen Auf das Thema antworten  [ 13 Beiträge ]  Gehe zu Seite Vorherige  1, 2
 Self-test fail 
Autor Nachricht
Foren-Mitglied
Foren-Mitglied

Registriert: Mi 9. Apr 2014, 15:25
Beiträge: 107


Bedankte sich: 8 mal
Erhielt: 2 Danksagungen in 1 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Self-test fail
oxygen8 hat geschrieben:
Zitat:
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0


Alle defekten Sektoren wurden ersetzt.

Lasse nun den langen Selbsttest laufen und er sollte fehlerfrei sein.


Test ist wider bei 90% abgebrochen :D
Code:
root@Backup_Nas:~# smartctl -d marvell /dev/sdb --all
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST9250315AS
Serial Number:    6VC3D2L7
Firmware Version: 0001SDM1
User Capacity:    250,059,350,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Not recognized. Minor revision code: 0x29
Local Time is:    Mon Sep 22 17:46:53 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline
data collection:                 (   0) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  68) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   110   076   006    Pre-fail  Always       -       224591501
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3167
  5 Reallocated_Sector_Ct   0x0033   089   089   036    Pre-fail  Always       -       227
  7 Seek_Error_Rate         0x000f   076   060   030    Pre-fail  Always       -       4337204784
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2472
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   037   020    Old_age   Always       -       1743
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Unknown_Attribute       0x0032   001   001   000    Old_age   Always       -       22998
188 Unknown_Attribute       0x0032   100   099   000    Old_age   Always       -       486
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0
190 Temperature_Celsius     0x0022   068   051   045    Old_age   Always       -       538312736
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       725
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   086   086   000    Old_age   Always       -       29539
194 Temperature_Celsius     0x0022   032   049   000    Old_age   Always       -       32 (Lifetime Min/Max 0/10)
195 Hardware_ECC_Recovered  0x001a   043   040   000    Old_age   Always       -       224591501
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 23546 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23546 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 05 cd b7 0d  Error: UNC at LBA = 0x0db7cd05 = 230149381

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 cd b7 4d 00      03:43:34.016  READ DMA EXT
  35 00 00 a0 a9 b7 4d 00      03:43:34.015  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:31.694  READ DMA EXT
  35 00 00 a0 a7 b7 4d 00      03:43:31.692  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:29.306  READ DMA EXT

Error 23545 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 05 cd b7 0d  Error: UNC at LBA = 0x0db7cd05 = 230149381

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 cd b7 4d 00      03:43:31.694  READ DMA EXT
  35 00 00 a0 a7 b7 4d 00      03:43:31.692  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:29.306  READ DMA EXT
  35 00 00 a0 a5 b7 4d 00      03:43:29.304  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:26.983  READ DMA EXT

Error 23544 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 05 cd b7 0d  Error: UNC at LBA = 0x0db7cd05 = 230149381

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 cd b7 4d 00      03:43:29.306  READ DMA EXT
  35 00 00 a0 a5 b7 4d 00      03:43:29.304  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:26.983  READ DMA EXT
  35 00 00 a0 a3 b7 4d 00      03:43:26.981  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:24.645  READ DMA EXT

Error 23543 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 05 cd b7 0d  Error: UNC at LBA = 0x0db7cd05 = 230149381

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 cd b7 4d 00      03:43:26.983  READ DMA EXT
  35 00 00 a0 a3 b7 4d 00      03:43:26.981  WRITE DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:24.645  READ DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:22.236  READ DMA EXT
  25 00 08 f8 cc b7 4d 00      03:43:22.236  READ DMA EXT

Error 23542 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 05 cd b7 0d  Error: UNC at LBA = 0x0db7cd05 = 230149381

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 cd b7 4d 00      03:43:24.645  READ DMA EXT
  25 00 08 00 cd b7 4d 00      03:43:22.236  READ DMA EXT
  25 00 08 f8 cc b7 4d 00      03:43:22.236  READ DMA EXT
  25 00 08 f0 cc b7 4d 00      03:43:22.235  READ DMA EXT
  25 00 08 e8 cc b7 4d 00      03:43:22.234  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      2472         230190301
# 2  Extended offline    Completed: read failure       90%      2436         253026635
# 3  Extended offline    Completed: read failure       90%      2436         253026635
# 4  Extended offline    Completed: read failure       90%      2436         253026635
# 5  Extended offline    Completed: read failure       90%      2436         253026635

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Mo 22. Sep 2014, 17:49
Profil
Dieser Werbeblock wird nur bei Gästen angezeigt
Online
Globaler Moderator

Registriert: Mo 5. Apr 2010, 23:32
Beiträge: 6228
Bilder: 333

Bedankte sich: 173 mal
Erhielt: 800 Danksagungen in 739 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Self-test fail
Ok, das kenne ich so noch nicht.

Ich würde die Platte so als Backup benutzen.


Mo 22. Sep 2014, 18:44
Profil Persönliches Album 
Foren-Mitglied
Foren-Mitglied

Registriert: Mi 9. Apr 2014, 15:25
Beiträge: 107


Bedankte sich: 8 mal
Erhielt: 2 Danksagungen in 1 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Self-test fail
oxygen8 hat geschrieben:
Ok, das kenne ich so noch nicht.

Ich würde die Platte so als Backup benutzen.

ok trozdem danke :)
hab die platte jetz im raid 1 als backup bis sie entgültig kaput geht :D


Mo 22. Sep 2014, 21:43
Profil
Beiträge der letzten Zeit anzeigen:  Sortiere nach  

Ein neues Thema erstellen Auf das Thema antworten  [ 13 Beiträge ]  Gehe zu Seite Vorherige  1, 2





Suche nach:

Ähnliche Beiträge

Test einer LS-WVL
Forum: Festplatten und SSD-Laufwerke
Autor: Jan
Antworten: 1
SMART Self-test
Forum: Buffalo Linkstation Duo
Autor: oxygen8
Antworten: 3

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste


Deine Berechtigungen

 Du darfst keine neuen Themen in diesem Forum erstellen.
 Du darfst keine Antworten zu Themen in diesem Forum erstellen.
 Du darfst deine Beiträge in diesem Forum nicht ändern.
 Du darfst deine Beiträge in diesem Forum nicht löschen.
 Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu:  


| NAS-Hilfe.de - die deutsche Buffalo NAS-Hilfe Seite | Mein Blog - Bloggen Querbeet... | Powered by phpBB © phpBB Group. | Deutsche Übersetzung durch phpBB.de | Impressum |