Aktuelle Zeit: Mo 23. Okt 2017, 17:11



Ein neues Thema erstellen Auf das Thema antworten  [ 5 Beiträge ] 
 Error 1 occurred at disk power-on? 
Autor Nachricht
Foren-Mitglied
Foren-Mitglied

Registriert: Mi 9. Apr 2014, 15:25
Beiträge: 107


Bedankte sich: 8 mal
Erhielt: 2 Danksagungen in 1 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Error 1 occurred at disk power-on?
hallo wolte mal fragen was dieser fehler heist :)

Code:
smartctl 5.42 2011-10-20 r3458 [armv7l-linux-3.3.4] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9500325AS
Serial Number:    6VE6PTH9
LU WWN Device Id: 5 000c50 022496cd9
Firmware Version: 0002BSM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Sep 13 18:06:59 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 139) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103b) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   114   099   006    Pre-fail  Always       -       82892149
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1920
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       11
  7 Seek_Error_Rate         0x000f   073   060   030    Pre-fail  Always       -       8634127426
  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       10136
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       1018
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   099   099   000    Old_age   Always       -       1
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       8590065680
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   056   045    Old_age   Always       -       33 (Min/Max 27/33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       48
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       90
193 Load_Cycle_Count        0x0032   078   078   000    Old_age   Always       -       44076
194 Temperature_Celsius     0x0022   033   044   000    Old_age   Always       -       33 (0 12 0 0 0)
195 Hardware_ECC_Recovered  0x001a   044   027   000    Old_age   Always       -       82892149
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 1286 hours (53 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d7 2c cb 05  Error: UNC at LBA = 0x05cb2cd7 = 97201367

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 d5 80 d7 2c cb 45 00      00:04:45.281  READ DMA EXT
  25 d5 80 d7 ed ca 45 00      00:04:44.646  READ DMA EXT
  25 d5 80 d7 9d ca 45 00      00:04:43.791  READ DMA EXT
  25 d5 80 57 96 ca 45 00      00:04:43.613  READ DMA EXT
  25 d5 80 d7 95 ca 45 00      00:04:43.542  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 90%     10136         -
# 2  Conveyance offline  Completed without error       00%      3662         -
# 3  Short offline       Completed without error       00%      3662         -
# 4  Extended offline    Completed without error       00%       368         -
# 5  Short offline       Completed without error       00%       349         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Sa 13. Sep 2014, 18:08
Profil
Dieser Werbeblock wird nur bei Gästen angezeigt
Online
Globaler Moderator

Registriert: Mo 5. Apr 2010, 23:32
Beiträge: 6291
Bilder: 337

Bedankte sich: 174 mal
Erhielt: 807 Danksagungen in 746 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Error 1 occurred at disk power-on?
Zitat:
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 11


Die Platte hatte defekte Sektoren und hat sie durch Reservesektoren ersetzt.
Crystal Disk Info würde sie mit "Vorsicht" einstufen!


Sa 13. Sep 2014, 21:38
Profil Persönliches Album 
Foren-Mitglied
Foren-Mitglied

Registriert: Mi 9. Apr 2014, 15:25
Beiträge: 107


Bedankte sich: 8 mal
Erhielt: 2 Danksagungen in 1 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Error 1 occurred at disk power-on?
oxygen8 hat geschrieben:
Zitat:
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 11


Die Platte hatte defekte Sektoren und hat sie durch Reservesektoren ersetzt.
Crystal Disk Info würde sie mit "Vorsicht" einstufen!


und was bedeutet dieser Fehler?

Code:
Error 1 occurred at disk power-on lifetime: 1286 hours (53 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 d7 2c cb 05  Error: UNC at LBA = 0x05cb2cd7 = 97201367

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 d5 80 d7 2c cb 45 00      00:04:45.281  READ DMA EXT
  25 d5 80 d7 ed ca 45 00      00:04:44.646  READ DMA EXT
  25 d5 80 d7 9d ca 45 00      00:04:43.791  READ DMA EXT
  25 d5 80 57 96 ca 45 00      00:04:43.613  READ DMA EXT
  25 d5 80 d7 95 ca 45 00      00:04:43.542  READ DMA EXT


Sa 13. Sep 2014, 22:09
Profil
Online
Globaler Moderator

Registriert: Mo 5. Apr 2010, 23:32
Beiträge: 6291
Bilder: 337

Bedankte sich: 174 mal
Erhielt: 807 Danksagungen in 746 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Error 1 occurred at disk power-on?
Zitat:
Error: UNC at LBA = 0x05cb2cd7 = 97201367

Das ist die Stelle des ersten Fehlers.

Mir ist es egal, ob der defekt außen oder innen liegt.
Bei mir wird so eine Platte nur noch zum Transportieren von Daten und zum Verborgen an Freunde benutzt.


Sa 13. Sep 2014, 22:12
Profil Persönliches Album 
Foren-Mitglied
Foren-Mitglied

Registriert: Mi 9. Apr 2014, 15:25
Beiträge: 107


Bedankte sich: 8 mal
Erhielt: 2 Danksagungen in 1 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Error 1 occurred at disk power-on?
oxygen8 hat geschrieben:
Zitat:
Error: UNC at LBA = 0x05cb2cd7 = 97201367

Das ist die Stelle des ersten Fehlers.

Mir ist es egal, ob der defekt außen oder innen liegt.
Bei mir wird so eine Platte nur noch zum Transportieren von Daten und zum Verborgen an Freunde benutzt.


ok danke :)


Sa 13. Sep 2014, 23:55
Profil
Beiträge der letzten Zeit anzeigen:  Sortiere nach  

Ein neues Thema erstellen Auf das Thema antworten  [ 5 Beiträge ] 





Suche nach:

Ähnliche Beiträge

Disk 1 Error
Forum: Buffalo Linkstation Duo
Autor: Compikub
Antworten: 37
Raid1 - Disk 2 Error
Forum: Buffalo Linkstation Duo
Autor: oxygen8
Antworten: 5
Auto Power
Forum: Buffalo Linkstation Duo
Autor: Iksi
Antworten: 2
LS220 Power-LED blinkt schnell weiß
Forum: Buffalo Linkstation Pro Duo
Autor: oxygen8
Antworten: 1
Linkstation HDD error
Forum: Buffalo Linkstation Pro/Live mit BitTorrent
Autor: StrolchPower
Antworten: 6

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste


Deine Berechtigungen

 Du darfst keine neuen Themen in diesem Forum erstellen.
 Du darfst keine Antworten zu Themen in diesem Forum erstellen.
 Du darfst deine Beiträge in diesem Forum nicht ändern.
 Du darfst deine Beiträge in diesem Forum nicht löschen.
 Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu:  


| NAS-Hilfe.de - die deutsche Buffalo NAS-Hilfe Seite | Mein Blog - Bloggen Querbeet... | Powered by phpBB © phpBB Group. | Deutsche Übersetzung durch phpBB.de | Impressum |