Aktuelle Zeit: Do 24. Aug 2017, 08:51



Ein neues Thema erstellen Auf das Thema antworten  [ 25 Beiträge ]  Gehe zu Seite Vorherige  1, 2, 3
 Passwort Reset und DLNA Probleme 
Autor Nachricht
Foren-Neuling
Foren-Neuling

Registriert: Sa 27. Feb 2016, 18:48
Beiträge: 13


Bedankte sich: 0 mal
Erhielt: 0 Danksagungen in 0 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Passwort Reset und DLNA Probleme
D.h ein langer Dateiname oder ein fehlerhaftes Zeichen im Dateinamen können die Ursache sein?

@ssh

ich hab mich an dieser anleitung orientiert
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/ssh-freischalten-auf-einer-ls210d-t2408.html

Zitat:
java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "(echo newrootpass;echo newrootpass)|passwd"

java -jar acp_commander.jar -t 192.168.0.13 -o -addons

java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "sed -i 's/SUPPORT_SFTP=0/SUPPORT_SFTP=1/g' /etc/nas_feature"

java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "sed -i 's/SFTP=0/SFTP=1/g' /etc/nas_feature"

java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "sed -i 's/PermitRootLogin no/PermitRootLogin yes' /etc/sshd_config"

java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "sed -i 's/#PermitRootLogin no/PermitRootLogin yes' /etc/sshd_config"

java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "/etc/init.d/sshd.sh restart"


Zitat:
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
SSH enabled OK!
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)
New root password set OK!


wenn ich nun mit putty auf 192.168.0.13 port 22 verbinden mcöhte, bekomm ich die Meldung, das die Verbindung nicht möglich ist. "Connection refused"


Mo 14. Mär 2016, 01:06
Profil
Dieser Werbeblock wird nur bei Gästen angezeigt
Globaler Moderator

Registriert: Mo 5. Apr 2010, 23:32
Beiträge: 6228
Bilder: 333

Bedankte sich: 173 mal
Erhielt: 800 Danksagungen in 739 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Passwort Reset und DLNA Probleme
Wiederhole den letzten Befehl ,bis du eine Ausgabe bekommst
java -jar acp_commander.jar -t 192.168.0.13 -ip 192.168.0.13 -pw Password -c "/etc/init.d/sshd.sh restart"


Mo 14. Mär 2016, 07:58
Profil Persönliches Album 
Foren-Neuling
Foren-Neuling

Registriert: Sa 27. Feb 2016, 18:48
Beiträge: 13


Bedankte sich: 0 mal
Erhielt: 0 Danksagungen in 0 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Passwort Reset und DLNA Probleme
Wenn ich diesen befehl eingebe, erhalte ich immer folgende Rückmeldung

Zitat:
Authenticate EnOneCmd... OK
Authenticate with admin pw... OK
OK (OK)


sollte da (noch) etwas anderes kommen?


Mo 14. Mär 2016, 08:27
Profil
Globaler Moderator

Registriert: Mo 5. Apr 2010, 23:32
Beiträge: 6228
Bilder: 333

Bedankte sich: 173 mal
Erhielt: 800 Danksagungen in 739 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Passwort Reset und DLNA Probleme
Ja.


Mo 14. Mär 2016, 10:57
Profil Persönliches Album 
Foren-Neuling
Foren-Neuling

Registriert: Sa 27. Feb 2016, 18:48
Beiträge: 13


Bedankte sich: 0 mal
Erhielt: 0 Danksagungen in 0 Beiträgen

Bedanke dich für den Beitrag 
Beitrag Re: Passwort Reset und DLNA Probleme
ich hatte vorhin die acp_commander exe für Windows und dort in der Befehlszeile die Sachen eingegeben. das war wohl falsch ...
Hab dann das *.jar geladen und es nun über die Konsole gemacht.

Zitat:
C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "(echo newrootpass;echo newrootpass)|passwd"
Mär 15, 2016 12:14:48 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
there seems to be no existing prefs, write default values
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 3D7CC74DEFAF
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
Found: LS210D8AB (/192.168.0.13) LS210D(ICHIJO) (ID=00029) mac: DC:
FB:02:2C:28:AB Firmware= 1.630 Key=526CEE70
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_PASSWORD_ERROR
>(echo newrootpass;echo newrootpass)|passwd

Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -o -addon
s
Mär 15, 2016 12:15:12 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 51B096E86BF2
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
Found: LS210D8AB (/192.168.0.13) LS210D(ICHIJO) (ID=00029) mac: DC:
FB:02:2C:28:AB Firmware= 1.630 Key=1EF61EEC
Trying to authenticate EnOneCmd... ACP_STATE_OK
Installing addons.tar ...
creating directory... OK
Didn't find <addons.tar> locally, looking at
http://downloads.nas-central.org/Uploads/LSPro/Binaries/
untaring ...
Untaring complete, you can review the log in
//192.168.0.13/share/acp_commander/untar.log
start telnetd...
Reset root pwd...

You can now telnet to your box as user 'root' providing no / an empty password.

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "sed -i 's/SUPPORT_SFTP=0/SUPPORT_SFTP=1/g' /etc/nas_fea
ture"
Mär 15, 2016 12:15:44 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 3865451189B3
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
Found: LS210D8AB (/192.168.0.13) LS210D(ICHIJO) (ID=00029) mac: DC:
FB:02:2C:28:AB Firmware= 1.630 Key=5AB508CB
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_PASSWORD_ERROR
>sed -i 's/SUPPORT_SFTP=0/SUPPORT_SFTP=1/g' /etc/nas_feature

Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "sed -i 's/SFTP=0/SFTP=1/g' /etc/nas_feature"
Mär 15, 2016 12:16:02 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = FCB8D32E38C4
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
Found: LS210D8AB (/192.168.0.13) LS210D(ICHIJO) (ID=00029) mac: DC:
FB:02:2C:28:AB Firmware= 1.630 Key=66ABD950
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_PASSWORD_ERROR
>sed -i 's/SFTP=0/SFTP=1/g' /etc/nas_feature

Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "sed -i 's/PermitRootLogin no/PermitRootLogin yes' /etc/
sshd_config"
Mär 15, 2016 12:16:13 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 374354ECE4B2
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
Found: LS210D8AB (/192.168.0.13) LS210D(ICHIJO) (ID=00029) mac: DC:
FB:02:2C:28:AB Firmware= 1.630 Key=1EE6A412
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_PASSWORD_ERROR
>sed -i 's/PermitRootLogin no/PermitRootLogin yes' /etc/sshd_config

Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very
rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not bee
n set. Use the WebGUI to make appropriate settings.

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "sed -i 's/#PermitRootLogin no/PermitRootLogin yes' /etc
/sshd_config"
Mär 15, 2016 12:16:23 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = 8489582476F4
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
A SocketTimeoutException usually indicates bad firewall settings.
Check especially for *UDP* port 22936 and make sure that the connection to your
LS is working.
ERROR: Exception: SocketTimeoutException (Receive timed out) [ACP Send/Receive (
Packet:8020 = ACP_Discover)]

C:\Users\mclaren\Downloads>java -jar acp_commander.jar -t 192.168.0.13 -ip 192.1
68.0.13 -pw Password -c "/etc/init.d/sshd.sh restart"
Mär 15, 2016 12:16:34 AM java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0
x80000002. Windows RegCreateKeyEx(...) returned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!


Using random connID value = A62E421305B2
Using target: LS210D8AB/192.168.0.13
Starting authentication procedure...
Sending Discover packet...
A SocketTimeoutException usually indicates bad firewall settings.
Check especially for *UDP* port 22936 and make sure that the connection to your
LS is working.
ERROR: Exception: SocketTimeoutException (Receive timed out) [ACP Send/Receive (
Packet:8020 = ACP_Discover)]


windows firewall war deaktiviert


Di 15. Mär 2016, 01:22
Profil
Beiträge der letzten Zeit anzeigen:  Sortiere nach  

Ein neues Thema erstellen Auf das Thema antworten  [ 25 Beiträge ]  Gehe zu Seite Vorherige  1, 2, 3





Suche nach:

Ähnliche Beiträge

admin passwort geht nach reset nicht mehr
Forum: Buffalo Linkstation Pro/Live mit BitTorrent
Autor: alexathome
Antworten: 34
'factory reset' klappt nicht
Forum: Buffalo Linkstation Quad
Autor: oxygen8
Antworten: 1
Factory Reset + Firmware beschädigt
Forum: Buffalo Linkstation Pro/Live mit BitTorrent
Autor: oxygen8
Antworten: 3
Twonky ist nach server reset nicht erreichbar
Forum: Buffalo Linkstation Mini
Autor: Jan
Antworten: 4
Buffalo TeraStation Pro II Rackmount (TS-RHTGL-R5) - Hard Reset!!!
Forum: Buffalo TeraStation
Autor: oxygen8
Antworten: 3

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 20 Gäste


Deine Berechtigungen

 Du darfst keine neuen Themen in diesem Forum erstellen.
 Du darfst keine Antworten zu Themen in diesem Forum erstellen.
 Du darfst deine Beiträge in diesem Forum nicht ändern.
 Du darfst deine Beiträge in diesem Forum nicht löschen.
 Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu:  


| NAS-Hilfe.de - die deutsche Buffalo NAS-Hilfe Seite | Mein Blog - Bloggen Querbeet... | Powered by phpBB © phpBB Group. | Deutsche Übersetzung durch phpBB.de | Impressum |